Prof. Gupta has been known internationally for many years for his pioneering contributions from India to the fields of little researched areas of impact mechanics and plasticity. Over 374 research papers with 6000+ citation (h-index - 41 and i-10 index - 135) that he has published in well-known journals are a testimony to the original and significant contributions made by him.
· Publications in Referred Journals
1. N. K. Gupta and B. Karunes (1972). On Portevin Le Chatelier effect. Presented, 17th Congress ISTAM.
2. N. K. Gupta and B. Karunes
(1973). On changes in the velocity of testing during uniaxial tension test.
Presented, 18th Conference ISTAM.
3. N. K. Gupta and B. P. Ambasht
(1978). Analysis and fitting of large deformation data. In proceedings of 24rd
Congress ISTAM, 88-89.
4. N. K. Gupta and S. M. A. Kazimi
(1978). A new technique for the experimental determination of the coefficient
of static and dynamic friction. In proceedings of 23rd Congress ISTAM, 226-236.
5.
N. K. Gupta and B. Karunes (1978). A three parameter stress-strain relation for
large deformation in metals. Journal of Engineering Production, 2, 163-173.
6. Gupta, N. K., & Karunes,
B. (1978). A three parameter stress-strain relation for large deformation in
metals. J. Engrg. Prod., 2, 163.
7.
W. Johnson, N. K. Gupta and A. G. Mamalis (1979). Sand spillage from an open
topped rectangular container when in axial collision. International Journal of
Vehicle Design, 1, 61-73.
8.
N. K. Gupta and B. Karunes (1979).
A Dynamic analysis of necking phenomenon. International Journal of Mechanical
Sciences, 21, 387-397.
9.
N.
K. Gupta and S. M. A. Kazimi (1980). An experimental investigation into shear
wall rigid frame interaction. In proceedings of 24th Congress ISTAM, 67-79.
10.
N.
K. Gupta and B. P. Ambasht (1981). Initiation and further development of
non-uniform deformation in tension. Presented, GAMM Conference Wurzburg, West
Germany.
11.
N. K.Gupta and H. A.
Lauert (1982). Uber abweichungen von der konvexen form der flies kurve
vorde-formierten proben. presented,
GAMM Budapest.
12.
N. K. Gupta and B. P. Ambasht
(1982). On non-uniform deformation in uniaxial tension. ZAMM, 62, 411-415.
13.
Gupta, N. K., & Ambasht, B. P.
(1982). An experimental investigation of tensile deformation of round
bars. Mechanics of Materials, 1(3), 219-228.
14. Gupta, N. K., & Johnson, W.
(1983). The compression of crossed layers of wooden bars. International
Journal of Mechanical Sciences, 25(9-10), 697-712.
15.
Lauert, H. A., & Gupta, N. K.
(1983). A study of yield surface upon reversal of loading under biaxial
stress. ZAMM‐Journal of Applied Mathematics and Mechanics/Zeitschrift
für Angewandte Mathematik und Mechanik, 63(10), 497-504.
16.
N. K. Gupta and C. B. Shah (1984);
On post rolling barreling profile in simple compression. Journal of Engineering
Production, 7, 121-136.
17.
N.
K. Gupta and B. P. Ambasht (1984); Geometry effects on tensile test data. In
proceedings of Symposium on Large Deformation, 134-145.
18.
N.
K. Gupta and C. B. Shah (1984); Tensile instability and differential hardening
during necking. In proceedings of Symposium on Large Deformation, 146-155.
19.
N.
K. Gupta (1984); On large deformations - some aspects. 29th Congress ISTAM,
(Invited).
20.
N. K. Gupta and W. Johnson (1985);
Rate effects in lateral compression for an energy absorbing unit of crossed
layers of wooden bars. International Journal Impact Engineering, 3, 121- 136.
21.
H. S. Yadav and N. K. Gupta
(1985); Study of collapse of a free surface conical cavity due to plane or
spherical shock wave. International Journal of Impact Engineering, 3, 217-232.
22.
N .K. Gupta and C. B. Shah (1986);
Barreling of a short cylinder in compression. International Journal on Machine
Tool Design and Research, 26, 137-146.
23.
N. K. Gupta and A. Meyers (1986);
Description of initial and subsequent yield surfaces. ZAMM, 66, 435-439.
24.
N.
K. Gupta (1987); Large Deformations - a phenomenological perspective. Karunes
Memorial Lecture at 32nd Congress ISTAM, (Invited).
25.
N.
K. Gupta (1988); On yielding of metals. 33rd Congress ISTAM.(Invited)
26.
N.
K. Gupta (1988); Certain considerations in yielding of metals. Symposium on
Fracture Mechanics and Fatigue of Materials, Lucknow, (Invited).
27.
V. M .Kumar and N. K. Gupta
(1988);The effect of prior fattigue cycling on tensile properties of copper and
aluminium. Int Jou of Fatigue and Fracture of Engng. Matls. andStrs., 11,
231-240.
28.
H. S. Yadav and N. K. Gupta
(1988); Flyer plate motion and its deformation during flight. International
Journal of Impact Engineering, 7, 71-83.
29.
N.
K. Gupta (1989); On subsequent yield surfaces determined by multi-probes from stress
free state. In advances in Plasticity, Plasticity 89, TSU Japan, 87-90.
30.
N.
K. Gupta (1989): A description of experimental yield surfaces. In Advances in
Plasticity , Plasticity 89, Tsu, Japan,91-94
31.
N.
K. Gupta (1989); Axial collapse of round and square tubes. 34th Congress ISTAM,
(Invited).
32.
N.
K. Gupta (1990); Experimental yield surfaces and their description. In advances
in Mechanical Engineering, Procs .of 7th ISME, (Invited), 381-387.
33.
N.
K. Gupta and S. K. Sinha (1990); An analysis of the symmetrical collapse of a
square tube. In advances in Mechanical Engineering, Procs. of 7th ISME,
400-406.
34.
N.
K. Gupta (1990); On experimental yield surfaces. 35th Congress ISTAM,
(Invited).
35.
N.
K. Gupta (1990); Plastic collapse and energy dissipation in metal tubes.
NASAS-90, National Seminar on Aerospace Structures at NAL Bangalore, (Invited).
36.
N.
K. Gupta (1990); Large déformations - phenomenological
perspective. Symposium
on Plasticity in honor of Prof. Th.Lehmann, Ruhr University Bochum Germany
(Invited).
37.
N.
K. Gupta (1990); A question of perception. In: The odyssey of science, culture
and consciousness, Edited by Kishore Gandhi. Abhinav Publications, New Delhi.
135-140
38.
N.
K. Gupta, H. A
.Lauert and U. Zdebel (1990); On deformation under strain path with a corner.
ZAMM, 70, 325-330.
39.
N.
K. Gupta and A.
Meyers (1990); Fitting of experimental yield surfaces. ZAMM, 70, 181-187.
40.
N. K. Gupta and S. K. Sinha
(1990); Transverse collapse of thin walled square tubes in opposed loadings.
International Journal of Thin Walled Structures, 10, 247-262.
41.
N. K. Gupta and S. K. Sinha
(1990); Lateral compression of crossed layers of square section tubes.
International Journal of Mechanical Sciences, 32, 565-580.
42.
N. K. Gupta and S. K. Sinha
(1990); Collapse of a laterally compressed square tube resting on a flat base.
International Journal of Solids and Structures, 26, 601-615.
43.
N.
K. Gupta (1991); Lateral compression of square tubes - a study in
crashworthiness. Karunes Memorial Lecture, 36th ISTAM Congress, IIT Bombay,
(Invited).
44.
N.K. Gupta and A. Meyers (1992);
Considerations of translated stress deviators in describing yield surfaces.
International Journal of Plasticity, 8, 729-740.
45.
N. K. Gupta and V. Madhu (1992);
Normal and oblique impact of a kinetic energy projectile on mild steel plates.
International Journal of Impact Engineering, 12, 333-343.
46.
N.
K. Gupta (1993); Taylor Memorial Lecture: Mechanics of projectile impact . 37th
ISTAM Conference, G. B. Pant Univ. of Agri. and Tech., (Invited), January.
47.
N.
K. Gupta (1993); Collapse of tubes - a study in crashworthiness. Seminar on
Aircraft Accident Investigation and Prevention, Chandigarh, (Invited), October.
48.
H.
A. Lauert and N. K. Gupta (1993); An experimental study in anisotropic
plasticity. IMPLAST'93, Symposium on Plasticity and Impact Mechanics; held at
IIT Delhi, Wiley Eastern Limited, 132- 144.
49.
Meyers
and N. K. Gupta (1993); A yield function for prestrained materials. IMPLAST'93,
Symposium on Plasticity and Impact Mechanics; held at IIT Delhi, Wiley Eastern
Limited, 145- 153.
50.
N.
K. Gupta and A. Khullar(1993); Collapse of aluminium tubes compressed
symmetrically between two non-orthogonally placed short width indenters.
IMPLAST'93, Symposium on Plasticity and Impact Mechanics; held at IIT Delhi,
Wiley Eastern Limited, 223-237.
51.
N.
K. Gupta and V. Madhu(1993); Oblique projectile impact on metallic plates -
perforation and ricochet. IMPLAST'93, Symposium on Plasticity and Impact
Mechanics; held at IIT Delhi, Wiley Eastern Limited, 339-346.
52.
N.
K. Gupta and S. K. Gupta (1993); The effect of the microstructure on the axial
collapse behaviour of round mild steel tubes. IMPLAST'93, Symposium on
Plasticity and Impact Mechanics; held at IIT Delhi, Wiley Eastern Limited.
53.
N.
K. Gupta and S. K. Gupta (1993); Energy absorption in axially collapsing thin
round tubes. 37th ISTAM Congress.
54.
N. K. Gupta and S. K. Gupta
(1993); Effect of annealing. size and cut-outs on axial collapse behaviour of
circular tubes, International Journal of Mechanical Sciences, 35, 597-613.
55.
N. K. Gupta and A.Khullar (1993);
Collapse of square and rectangular tubes in transverse loading. Archive of
Applied Mechanics, 63, 479-490.
56.
N. K. Gupta and A. Khullar (1994);
Lateral Collapse of Orthogonal and Non-orthogonal Cross-layered Arrays of
Square and Rectangular tubes. International Journal of Mechanical Sciences, 36,
449-467.
57.
N.
K. Gupta and A. Khullar (1994); Post collapse behavior of square and
rectangular tubes compressed symmetrically between two platens. Archive of
Applied Mechanics, 64, 472-479.
58.
N.
K. Gupta and A. Meyers (1994); An alternative formulation for interpolating
experimental yield surfaces. International Journal of Plasticity, 10, 795-805
59.
N.
K. Gupta (1994); Initial and subsequent yield surfaces - their determination
and idealization. Fracture Mechanics, proceedings of the Indo-German workshop,
150-155.
60.
N.
K. Gupta (1994); Seth Memorial Lecture, Collapse of thin walled structures - A
study in crashworthiness, 39th ISTAM Congress, Visakhapatnam.
61.
N.
K. Gupta and A. Meyers (1994); Description of the Yield Surfaces of prestrained
Materials. In: Fracture Mechanics Edited by A.V. Krishnamurthy and D. Bucholz
132-146
62.
N.
K. Gupta (1995): Impact Dynamics - Application to Aerospace Structures,
Invited, National Workshop on Shock and Vibration, RCI Hyderabad.
63.
N.
K. Gupta (1995): Crashworthiness of Vehicles, Presidential Address, 40th ISTAM
Congress, Bhopal.
64.
V.
Madhu, T. B. Bhat and N. K. Gupta (1995) Perforation and ricochet of ogive
shaped projectiles when subjected to ballistic impact on metal plates. In
Impact, waves and fracture, AMD 205, ASME, 239-48.
65.
N. K. Gupta and A. Khullar (1995);
Lateral crushing of square and rectangular tubes by non-orthogonally placed
narrow width indenters. International Journal of Mechanical Sciences, 37, 31-50.
66.
V.
Madhu, T. Balakrishna Bhat, and N. K. Gupta, (1995), Perforation and richochet
of ogive shaped projectiles when subjected to ballistic impact on metal plates,
American Society of mech. Engineers, App. Mech. Div., AMD 205, pp 239 – 48.
67.
.
N. K. Gupta, A. Meyers and A. Wichtmann (1995); A function for representing
experimental yield surfaces. European Journal of Mechanics A/Solids, 14, 45-53.
68.
N. K. Gupta and A. Khullar (1995);
Lateral compression of a square or rectangular tube between two parallel narrow
width indenters placed non- orthogonally. International Journal of Thin Walled
Structures, 22, 9-23.
69.
N. K. Gupta and R. Velmurugan
(1995); An analysis of axi-symmetric collapse of round tubes. International
Journal of Thin Walled Structures, 22, 261-274.
70.
N. K. Gupta and A. Khullar (1995);
Collapse load analysis of square and rectangular tubes subjected to transverse
in-plane loading. International Journal of Thin Walled Structures, 21, 345-358.
71.
N.
K. Gupta, P. Ray, S. K. Gupta and A. Khullar (1996): Lateral collapse of empty
and filled square aluminium tubes between two platens, Plasticity and Impact
Mechanics, New age Publishers, New Delhi, 236-249
72.
N.
K. Gupta and R. Velmurugan (1996): Axi-symmetric Axial Collapse of Round Tubes,
Plasticity and Impact Mechanics, New age Publishers, New Delhi, 325-339
73.
J.
L. Chenot, L. Fourment, F. Bay and N. K. Gupta (1996): Three dimensional finite
element simulation of metal forming processes with inertia effects, Plasticity
and Impact Mechanics, New age Publishers, New Delhi, 351-362
74.
N.
K. Gupta (1997): Yielding of Prestrained materials, 42 Istam Congress, Surat
(invited paper)
75.
N.
K. Gupta (1997) : When a crash does take place, National Symposium on Recent
Trends in Theoretical and Applied mechanics, REC Kurukshetra ( Keynote Lecture
)
76.
N. K. Gupta and V. Madhu (1997);
An Experimental Study of normal and oblique impact of a hard core projectile on
single and layered plates. International Journal of Impact Engineering, 19, 395
-414.
77.
N. K. Gupta and R. Velmurugan
(1997); Consideration of internal folding and non-symmetric fold formation in
axi-symmetric axial collapse of round tubes, International Journal of Solids
and Structures 34, 2611-2630.
78.
N K Gupta, R. Velmurugan and S K
Gupta (1997); An analysis of axial crushing of composite tubes, Journal of
Composite materials 31, 1262-1286.
79.
N. K. Gupta, G. L. Easwaraprasad
and S. K. Gupta, (1997); Plastic collapse of metallic conical frusta of Large
semi-epical angles, International Jou. of Crashworthiness, 2, 349-366
80.
N. K. Gupta; (1998) Some aspects
of axial collapse of cylindrical thin-walled tubes, International Journal of
Thin-Walled structures, 32, 111 – 126
81.
N. K. Gupta and P. K. Ray (1998) ,
Collapse of thin walled empty and filled square tubes under lateral loading
between rigid plates, Int. J. of Crashworthiness, 3, 265-85
82.
N.
K. Gupta and R. Velmurugan (1998): Axial crushing of foam filled composite
conical shells, Int. Conference on Thin- walled Structures, 2-4 Dec. 1998,
Singapore
83.
N.
K. Gupta and R. Velmurugan (1998) Axial crushing of composite shells, 43rd
ISTAM Congress, Coimbatore.
84.
N.
K. Gupta and G. L. Easwaraprasad (1998) : Collapse mechanisms of spherical
shells under axial compression, International Symposium on Impact Engineering,
7-9 Dec 1998, NUS Singapore
85.
Sidana,
M L; Tyagi, J K; Sharma, R K; Gupta, N K (1998) Experimental study of energy
absorption in aircraft crash barrier, 3rd International Symposium on Impact
Engineering; Singapore; pp. 385-391.
86.
N.
K. Gupta, G. L. Easwaraprasad and S. K. Gupta (1999) Impact Loading of Conical
Frusta, 11th ISME Conference on Mechanical Engineering, 3-5 Feb at IIT, Delhi,
p.378-383
87.
N.
K. Gupta (1999) Indian Society of mechanical Engineers – The Endevour, 11th
ISME Conference on Mechanical Engineering, 3-5 Feb at IIT, Delhi, p.1-3
88.
N.
K. Gupta and M. Alam(1999), Perforation of thin sheet by a cylindro-conical
penetrator, 11th ISME Conference on Mechanical Engineering, 3-5 Feb at IIT,
Delhi, p. 410-415.
89.
P.
K. Gupta, N. K. Gupta and G. S. Sekhon, (1999), A study of collapse of round
tubes, 11th ISME Conference on Mechanical Engineering, 3-5 Feb at IIT, Delhi,
416-421
90.
N.
K. Gupta, R. Velmurugan, R. Chandrabose and G. Partheepan, (1999), Graphical
simulation of axi-symmetric collapse of round tubes, 11th ISME Conference on
Mechanical Engineering, 3-5 Feb at IIT, Delhi, p. 480-485
91.
N.
K. Gupta and R. velmurugan (1999) Ananlysis of polyester and epoxy composite
shells subjected to axial crushing, 44th annual congress ISTAM, Warrangal.
92.
.N. K. Gupta, G. L. Easwara Prasad
and S. K. Gupta (1999); Axial compression of metallic spherical shells between
rigid plates, Int. J. of Thin Walled Structures, 34, 21-41
93.
N K Gupta and R Velmurugan (1999);
Axial compression of empty and foam filled composite conical shells, Journal of
Composite Materials, 33, 567-591
94.
N. K. Gupta, G. L. Easwara Prasad
and S. K. Gupta (1999); Axial compression of metallic spherical shells between
rigid plates, Int. J. of Thin Walled Structures, 34, 21-41
95.
N. K. Gupta and P. Ray; (1999)
Simply supported empty and filled thin-square tubular beams under central wedge
loading, Int. J. of Thin-walled structures, 34, 261-278
96.
N. K. Gupta and G. L. Easwara
Prasad, (1999) Quasi-static and dynamic axial compression of Glass/polyester
composite hemispherical shells, Int. Jou of Impact engineering, 22,
757-774.
97.
N.
K. Gupta and H. Abbas (2000), Axisymmetric axial collapse of thin frusta,
Thin-walled Structures, 36, 169-179.
98.
N.
K. Gupta and H. Abbas (2000), Lateral collapse of composite cylindrical tubes,
between flat platens, Int J. of Impact Engineering, 24, 329- 346
99.
N. K. Gupta and R. Velmurgan,
(2000) Analysis of polyester and epoxy composite shells subjected to axial
crushing, Int. J. Crashworthiness, 5, 333 – 344
100.
N.
K. Gupta and H. Abbas, (2000). Mathematical modeling of axial crushing of
cylindrical tubes, Thin- Walled Structures, 38, 355-375.
101. N. K. Gupta and P.
Ray, (2000). Lateral compression of empty and filled single tubes by short
width indenters, Int. J. of Crashworthiness, 5, 89-102.
102. N. K. Gupta (2001)
Book review: Impact Mechanics by W. J. Stronge, Int J Impact Engineering 25,
515-16
103. N. K. Gupta, G. S.
Sekhon and P. K. Gupta (2001) A study of fold formation in axisymmetric axial
collapse of round tubes, Int. J. of Impact Engineering, 27, 87-117
104. N. K. Gupta and H.
Abbas (2001) Some considerations in axisymmetric folding of metallic round
tubes, Int J Impact Engineering, 25, 331-44
105. N. K. Gupta, R.
Ansari and S. K. Gupta (2001) Normal impact of ogive nosed projectiles on thin
plates, Int. j. of Impact Engineering, 25, 641-660.
106. N. K. Gupta, G. S.
Sekhon and P. K. Gupta (2001) A study of lateral collapse of square and
rectangular metallic tubes, Int J. of Thin –Walled Structures, 39, 745-772
107. N. K. Gupta and R. Velmurugan,(2002) Experiments
and analysis of collapse behaviour of composite domes under axial compression,
J. of Composite Materials, 36, 899- 914.
108. .N. K. Gupta,
(2002) IMPLAST symposia and large deformations – a perspective, Int. J. of Impact
Engineering, 27, 901 – 918
109. G. S. Sekhon, N.
K. Gupta and K. Satayanarayana (2002) Computer simulation of metallic plates by
cylindrical projectiles having blunt and hemispherical ends, J. of Inst.
Engineers, 83, 129-135
110. H. Abbas and N.K.
Gupta (2002), “Straight fold analysis for axisymmetric axial crushing of
metallic cylindrical tubes”, Symposium on Large Deformation, Indian Institute
of Technology Delhi, New Delhi, India, Sept. 1.
111. M. Alam, H. Abbas
and N.K. Gupta (2002), “Response of plain and skin reinforced concrete under
drop hammer loading”, Symposium on Large Deformation, Indian Institute of
Technology Delhi, New Delhi, India, Sept. 1.
112. R. Velmurugan, N.
K. Gupta, S. Solaimurugan, and A. Elayaperumal, (2003) Experimental and
theoretical studies on effect of stitching of FRP cylindrical shells under
axial compression, IMPLAST,03 the 8th Symposium on Plasticity and Impact
Mechanics, Phoenix publishing house, New Delhi 432-443
113. H. Abbas and N. K.
Gupta (2003) On change in thickness in straight fold analysis for axial
crushing of metallic cylindrical tubes, , IMPLAST,03 the 8th Symposium on
Plasticity and Impact Mechanics, Phoenix Publishing House, New Delhi 499-508
114. P. K. Gupta, N. K.
Gupta and G. S. Sekhon, (2003) Study of lateral compression of square and
rectangular metallic tubes, , IMPLAST,03 the 8th Symposium on Plasticity and
Impact Mechanics, Phoenix publishing house, New Delhi 519 – 527
115. N. Mohammed
Sheriff, A. Arul Selvam, R. Velmurugan and N. K. Gupta (2003) Numerical and
experimental investigations of buckling behaviour of shallow hemispherical
shells, IMPLAST,03 the 8th Symposium on Plasticity and Impact Mechanics,
Phoenix publishing house, New Delhi 544 – 551.
116. N. K. Gupta,
Venkatesh and S. K. Gupta (2003) Experimental and numerical study of dynamic
axial compression of thin walled spherical shells, IMPLAST,03 the 8th Symposium
on Plasticity and Impact Mechanics, Phoenix publishing house, New Delhi 552 –
561
117. R. Velmurugan, S.
Thomas, and N. K. Gupta (2003) Impact perforation of CSM – polyester composite
laminated plates by cylindro – conical projectiles. , IMPLAST,03 the 8th
Symposium on Plasticity and Impact Mechanics, Phoenix publishing house, New
Delhi 678 – 687
118. H. Abbas, N. K.
Gupta, and M. Alam (2003) Nonlinear response of concrete plates under impact
loading, IMPLAST,03 the 8th Symposium on Plasticity and Impact Mechanics,
Phoenix publishing house, New Delhi 704 – 710
119. N. K. Gupta, R
Ansari and S. K. Gupta (2003) Normal impact of ogive nosed projectiles on thin
layered plates, IMPLAST,03 the 8th Symposium on Plasticity and Impact
Mechanics, Phoenix publishing house, New Delhi 711 – 722
120.
M.M.A. Khan, H. Abbas and N. K.
Gupta (2003) Analysis of axisymmetric crushing of frusta, Defence Science
Journal, 53, 41-50
121. T. Prakash, G. S. Sekhon and N. K. Gupta (2003)
Adaptive finite element analysis of plastic deformation of plates under
projectile impact, Defence Science Journal, 53, 57-65.
122. G. S. Sekhon, N.
K. Gupta, and P. K. Gupta (2003) An analysis of External inversion of round
tubes, J. Mater. Process Tech 133, 243-256
123. O. T. Bruhns, N.
K. Gupta, A Meyers and H Xiao (2003), Bending of an elastoplastic strip with
isotropic and kinematic hardening. Archive of Applied Mechanics, Volume 72,
pages 759-778,
124. V. Madhu, T.
Balakrishna Bhat, and N. K. Gupta, (2003) Normal and Oblique impacts of hard
projectile on single and layered plates – an experimental study, Defence
Science Journal, 53, 147-156
125. W. U. Khan, R.
Ansari and N. K. Gupta, (2003) Oblique impact of projectile on thin aluminium
plates, Defence Science Journal 53, 139-146.
126.
R. Velmurugan and N. K. Gupta
(2003) Energy absorption characteristics of metallic and composite shells, Def
Science Journal, 53, 127-138
127. H. Abbas, B. L.
Tyagi, M. Arif and N. K. Gupta, (2003) Curved fold model analysis for
axi-symmetric axial crushing of tubes, Int J. Thin-Walled Structures 41,
639-661
128. N. K. Gupta and
Nagesh (2004) Experimental and Numerical Studies of the Collapse of Thin Tubes
under Axial Compression, L.A. J. Solids and Structures, 1, 233 –260
129. N. K. Gupta (2004)
Influence of various parameters on collapse behaviour of thin cylinders, J.
S.J.U, (China) 1-6
130. H. Abbas, N. K.
Gupta, and M. Alam, (2004) Nonlinear response of concrete beams and plates
under impact loading, Int. J. Impact Engineering, 30, 1039 - 1054.
131. N. K. Gupta
(2004), Eighth Int. Symp. On Plasticity and Impact Mechanics - Guest editorial,
Int. J. Impact engineering, 30, 887-888.
132. N. K. Gupta and
Venkatesh (2004), Experimental and numerical studies of dynamic axial compression
of thin walled spherical shells, Int. J. Impact Engineering, 30, 1225-1240.
133.
R.
Velmurugan, N. K. Gupta, S. Solaimurugan, and A. Elayaperumal (2004), The
effect of stitching on FRP cylindrical shells under axial compression, Int. J.
Impact Engineering, 30, 923-938.
134. B. L. Tyagi, H.
Abbas, M. Arif, and N. K. Gupta, (2004), Change in thickness in curved fold
model for axial crushing of tubes, Int J. of Solids and Structures, 41,
7129-7153.
135. N. K. Gupta,
Nagesh and D. K. Sehgal (2004) Large deformation studies with thin walled
tubes, Icrash 2004, San Francisco, USA
136. N. K. Gupta (2004)
Non- axi-symmetric collapse of thin tubes, ICTAM 2004, the 21st Int Congress of
Theoretical and Applied Mechanics Warsaw Poland
137. R. Ansari, N. K.
Gupta and S. K. Gupta (2004) Oblique impact of ogive nosed projectile on thin
plates, 24th ISTS conference, Miyazaki, Japan.
138. V. Madhu, K.
Ramanjaneyulu, T. Balakrishna Bhat and N.K. Gupta (2004), An experimental study
of penetration resistance of ceramic armour subjected to projectile impact, 5th
ISIE, conference, Cambridge, UK
139. G. L. Easwara
Prasad and N. K. Gupta, (2004), Collapse behaviour of domes shells under impact
loading, , 5th ISIE, conference, Cambridge, UK.
140. A Deb, N. K.
Gupta, U. Biswas, and M S Mahendrakumar (2004), An improved lumped parameter
model for vehicle safety design application, Icrash 2004, San Francisco, USA
141. N. K. Gupta
(2004), Phenomenological Considerations in Large Deformations, ICTAM – 2004,
Keynote, Kharagpur.
142. N. K. Gupta
(2004), Influence of various parameters on collapse behaviour of thin
cylinders, AEPA conference, Shanghai, China
143. N. K. Gupta, G. S.
Sekhon and P. K. Gupta, (2005) Study of lateral compression of round metallic
tubes, J Thin-Walled structures, 43, 895-922.
144. N. K. Gupta. H.
Abbas, Venkatesh (2005), Consideration of straight fold analysis of thin tubes
under axial compression, Int J of Impact Engineering, 31, 1039-53
145. P. K. Gupta and N.
K. Gupta (2005), Multiple Barrelling in Axial Compression of Cylindrical Tubes
L.A. Int J. Solids and Structures, 2, 195-217
146.
1A.
Deb, N. K. Gupta, U. Biswas, and M S Mahendrakumar (2005), Designing for head
impact safety using a combination of lumped parameter and finite element
modeling, Int. J. Crashworthiness, 10, 249 –257.
147. Anindya Deb, Umesh
Biswas and N. K. Gupta (2005) Simulation driven design of helmets for head
impact protection using an injury based criterion, Int. Conf. on impact loading
of light weight structures, Florianopolis, Brazil
148. N. K. Gupta,
Nagesh, and D. K. Sehgal (2005), Modeling of deformation and tearing of clamped
circular plates under uniform impulsive loads, Int. Conf. on impact loading of
light weight structures, Florianopolis, Brazil
149. N. K. Gupta,
Nagesh, and D. K. Sehgal (2005), Deformation and tearing of circular plates
subjected to impulsive loads, Eyrodyne-2005, Paris.
150. P. K. Gupta, N. K.
Gupta and G. S. Sekhon (2005), A study of collapse of metallic tubes in context
of energy absorbing devices, Annual Congress of Indian Soc. of Mechanical
Engineers, New Delhi
151. N. K. Gupta (2005)
Collapse mode transitions in thin cylinders under axial loading, Annual
Congress of Indian Soc. of Mechanical Engineers, New Delhi (Invited)
152. M. A. Iqbal, N. K.
Gupta, G. S. Sekhon (2005) A numerical study of ballistic perforation of
1100-H12 aluminum plates, 12th International Conference on Applied Mathematics,
Indian National Science Academy, New Delhi
153.
N.
K. Gupta and Nagesh, (2006) Collapse mode transitions of thin tubes with wall
thickness, end condition and shape eccentricity, Int. J Mech. Sciences, 48,
210-223.
154. M. GaneshBabu, R.
Velmurugan and N. K. Gupta (2006) Energy absorption and ballistic limit of
targets struck by heavy projectiles, L.A. J. Solids and Structures, 3, 21-39.
155. N. K. Gupta, H.
Abbas, and M. Hosseini, (2006) Axisymmetric crushing of thin walled frusta and
tubes, Proceedings of Indian national science academy, 72, 49 - 54.
156. N. K. Gupta and
Venkatesh (2006), A study of the influence of diameter and wall thickness of
cylindrical tubes on their axial collapse, Thin-walled structures, 44, 290-300.
157. Deb, U. Biswas, J.
Ruan, and N. K. Gupta, (2006) Evaluation of safety of helmets using a
featureless hybrid III headform, Int. J. of Vehicle safety 1, 330-347.
158. R. Velmurugan, M.
Ganesh Babu and N. K. Gupta (2006), Projectile impact on sandwich panels, Int.
J. of Crashworthiness, 11, 153-164.
159. P. K. Gupta, and
N. K. Gupta (2006) An experimental and computational study of crushing of
metallic hemispherical shells between two flat platens, Journal of Strain
Analysis for Engineering Design 41, 453-466
160. N. K. Gupta, N.
Mohamed Sheriff and R. Velmurugan, (2006), A study of buckling of thin conical
frusta under axial loads, Thin - Walled Structures, 44, 986-996
161. M. Hosseini, H.
Abbas and N. K. Gupta (2006) Straight fold analysis for axisymmetric crushing
of thin walled frusta and tubes, LA Journal of Solids and Structures, 3,
345-360
162. K. S. Tan, S. V.
Wong, R. S. Radin Umar and N. K. Gupta (2006), An experimental study of
deformation behaviour of motorcycle front wheel-tyre assembly under frontal
impact loading Int. J. Impact Engineering, 32, 1554-1572.
163.
M
A. Iqbal, N. K. Gupta and G. S. Sekhon (2006) Experimental and numerical
studies of behaviour of thin aluminium plates subjected to impact by ogive
nosed projectiles, Defence Science Journal, 56, 841-852
164. P. K. Gupta, and
N. K. Gupta (2006) Computational and experimental studies of crushing of
metallic hemispherical shells, Archive of Applied Mechanics, 76, 511-524
165. V. Madhu, K.
Ramanjaneyulu, T. Balakrishna Bhat, N.K. Gupta, (2006) An Experimental Study of
Penetration Resistance of Ceramic Armour Subjected to Projectile Impact, Int J.
Impact Engineering, 32, 337-350.
166.
N.
K. Gupta, M. A. Iqbal and G. S. Sekhon ,(2006) Experimental and numerical
studies on the behaviour of thin aluminium plates subjected to impact of blunt
and hemispherical – nosed projectiles, Int J. Impact engineering, 32, 1921
-1944.
167.
G.
L. Easwara Prasad and N. K. Gupta, (2006) An experimental study of deformation
modes of domes and large angled frusta at different rates of compression, Int.
J. Impact engineering, 32, 400-415.
168. K. Ramanjaneyulu,
S. Pappu, V. Madhu, T. Balakrishna Bhat and N. K. Gupta (2006) Analysis and
modeling of ceramic armour penetration, 9th int. conf. on structures under
shock and impact, The New Forest UK.
169. H. Abbas and N. K.
Gupta (2006) Energy absorption in axial crushing of thin tubes and frusta,
Advances in Product Development (APD2006), Conf .The Institution of Engineers
(India) Allahabad, February 17-18,2006
170. N. K. Gupta
(2007), Archaeology of IMPLAST SYMPOSIA and some reminiscences, Int. Symposium
on Plasticity and Impact Mechanics, Ruhr University, Bochum Germany, The
University Press Bochum, 29-38
171. M. Ganesh Babu, R.
Velmurugan, N. K. Gupta (2007) Effect of projectile mass on fiber reinforced
epoxy laminates during intermediate velocity impact, Int. Symposium on
Plasticity and Impact Mechanics, Ruhr University, Bochum Germany, The
University Press Bochum, 191-198.
172. M. Hosseini, H.
Abbas and N. K. Gupta (2007) Perforation analysis for metallic plates impacted
by non-deformable projectiles, Int. Symposium on Plasticity and Impact
Mechanics, Ruhr University, Bochum Germany, The University Press Bochum,
279-286.
173. Nagesh and N. K.
Gupta (2007) Large deformation and damage progression in thin walled stiffened
free floating structures, Int. Symposium on Plasticity and Impact Mechanics,
Ruhr University, Bochum Germany, The University Press Bochum, 523-530.
174. M. Sheriff, R.
Aruna and N. K. Gupta (2007) Numerical analysis of stress wave propagation in
metallic targets subjected to non contact loads, Int. Symposium on Plasticity
and Impact Mechanics, Ruhr University, Bochum Germany, The University Press
Bochum, 607-614.
175. A Deb, M.
Raghuram, N. K. Gupta (2007), Simulation of oblique impact of jacketed hardened
core projectiles on mild steel plates, Int. Symposium on Plasticity and Impact
Mechanics, Ruhr University, Bochum Germany, The University Press Bochum, 631-
638.
176. M. A. Iqbal and N.
K. Gupta (2007) Ballistic penetration of single and layered aluminium plates,
Int. Symposium on Plasticity and Impact Mechanics, Ruhr University, Bochum
Germany, The University Press Bochum, 647-654.
177. M. A. Iqbal, N. K.
Gupta (2007) Numerical investigation of thin aluminum plates under the impact
of hemispherical nosed projectiles, National Seminar on Intelligent and
Emerging Technologies in Mechanical and Automotive Engineering, Institute of
Technology and Management Gurgaon, Gurgaon, Haryana
178.
N.
K. Gupta (2007) Structural Crashworthiness – a phenomenological perspective,
Joga Rao memorial Lecture, Proceedings XVth NASAS, Coimbatore, 3-13.
179. N. K. Gupta and
Nagesh (2007), Deformation and tearing of circular plates with varying support
conditions under uniform load, Int. Jou. of Impact Engineering, 34, 42-59
180. N. K. Gupta and
Venkatesh (2007), Experimental and numerical studies of impact axial
compression of thin walled conical shells, Int J Impact Engineering, 34,
708-720.
181. N. K. Gupta, M. A
Iqbal and G.S Sekhon (2007), Effect of projectile nose shape, impact velocity,
and target thickness on the deformation behaviour of thin aluminium targets,
Int J. Solids and Structures, 44, 3411-3439
182. N K Gupta, N
Mohamed Sheriff and R Velmurugan, (2007) Experimental and numerical
investigations into collapse behavior of thin spherical shells under drop
hammer impact, International Jou. of Solids and Structures, 44, 3136-3155
183. M. Raghuram, A.
Deb and N. K. Gupta, (2007) A numerical study of projectile impact on mild
steel armour plates, Current Science, 93, 498-506.
184. M. Ganesh Babu, R.
Velmurugan, N. K. Gupta (2007) Heavy mass projectile impact on thin and
moderately thick unidirectional fiber/epoxy laminates, LA Journal of Solids and
Structures, 4, 247-265.
185. P. K. Gupta, N. K.
Gupta and G. S. Sekhon (2008), Finite element analysis of collapse of metallic
tubes, Defense Science Journal, 58, 34 – 45.
186. N. K. Gupta, M. A.
Iqbal and G. S. Sekhon (2008), Effect of projectile nose shape, impact
velocity, and target thickness on the deformation behaviour of on layered
plates, Int. J. of Impact Engineering, 35, 37-60
187. N. K. Gupta, N.
Mohamed Sheriff and R. Velmurugan, (2008) Experimental and theoretical studies
on buckling of thin spherical shells under axial loads, Int. J. of Mechanical
Sciences, 50, 422-432.
188.
R.
Velmurugan and N. K Gupta (2008) Perforation of layered composite plates by
impactors of different nose shapes, Defence Science journal, 58, 227-237.
189. P. R. S. Reddy, V.
Madhu, K. Ramanjaneyulu, T. Balakrishna Bhat, K. Jayaraman, N. K. Gupta (2008)
Influence of polymer restraint on ballistic performance of alumina ceramic
tiles, Defence Science journal, 58, 264-274.
A.
Deb,
M. Raghuram, N. K. Gupta and V. Madhu (2008) Numerical simulation of projectile
impact on mild steel armour plates using LS-DYNA (part -1) validation, Defence
Science Journal, 58, 422-432
190. M. G. Babu, R.
Velmurugan, N. K. Gupta (2008), Energy – absorption capability of thin
laminates subjected to heavy – mass projectile impact of varying nose
geometries, Int. J. of Crashworthiness, 13, 237-46.
191.
N.
Mohamed Sheriff, N. K. Gupta, R. Velmurugan and N. Shanmugapriyan (2008)
Optimisation of thin conical frusta for impact energy absorption, Thin walled
Structures , 46, 653-666.
192. M. Raghuram, A.
Deb, N. K. Gupta and D. K. Kharat (2008) Numerical simulation of projectile
impact on mild steel armour plates using LS-DYNA (part -11) parametric studies,
Defence Science Journal, 58, 573-581.
193. N. K. Gupta, N.
Mohamed Sheriff and R. Velmurugan (2008)Analysis of collapse behaviour of
combined geometry metallic shells under axial impact , Int. J. of Impact
Engineering, 35, 731-41.
194.
M.
Raghuram, A. Deb, and N. K. Gupta (2008) A simulation driven study of oblique
impact of ogival – nosed projectiles on mild steel armour plates, LA J. Solids
and Structures, 5, 225-235
195. M. A. Iqbal and N.
K. Gupta (2008), Energy Absorption Characteristics of Aluminum Plates Subjected
to Projectile Impact, LA Journal of Solids and Structures, 5, 259-288.
196. N. K. Gupta (2008)
Invited lecture, Plasto-mechanics of large deformation under impact loading
ICTAM 2008, Adelaide, Australia (Under Print, Springer Verlag)
197. P. K. Pradhan, Y
Nath, S. Sundarrajan, N. K. Gupta, (2008) An experimental investigation of
spherical projectile impact on mild steel plate, Indo- Russian workshop. Goa.
198. M. Raghuraman, A.
Deb, N. K. Gupta, D. K. Kharat (2008), Numerical Simulation of Projectile
Impact on Mild Steel Armour Plate using LS-DYNA: Part-1. Validation,
Defence Science Journal 58 (4)
199. M. A. Iqbal, G.
Gupta, N. K. Gupta (2008) 3D Numerical Simulations of Ductile Targets Subjected
to Oblique Impact by Sharp Nosed Projectiles, Indo-Russian Workshop on Topical
Problems in Solid Mechanics, BITS Pilani Goa Campus.
200. N. K. Gupta (2009)
Invited lecture, The Indian Society of Theoretical and Applied Mechanics – A
journey through time Annual Congress ISTAM, December, 2009New Delhi,
201. N. K. Gupta (2009)
Invited Lecture, Mechanics of energy absorption in thin walled
structures and safety in unintended crash of transport vehicles, Science
Conclave, Allahabad, December 2009.
202.
M.
Hosseini, H. Abbas and N. K. Gupta (2009) Change in thickness in straight fold
models for axial crushing of thin-walled frusta and tubes, Thin Walled
structures,47, 98-108.
203.
P. K. Gupta and N. K. Gupta (2009)
A study of axial compression of metallic hemispherical domes, Journal of
material processing technology, 209, 2175-2179.
204.
V.
Manzhirov, S. A. Lychev, and N. K. Gupta, (2009) Convolution variational
principles and their applications to continuum mechanics [in Russian], in
Advances in Continuum Mechanics, DalnaukaPabl., Vladivostok, PP. 506–524.
205. K. S. Tan, S. V.
Wong, R. S. Radin Umar and N. K. Gupta (2009), Impact Behaviour Modeling of
Motorcycle Front Wheel-Tyre Assembly, Int. J. Automotive Technology, 10,
329-339.
206. M. Raghuraman, A. Deb and N K Gupta (2009) CAE-based
prediction of projectile residual velocity for impact on single and
multi-layered metallic armour plates, , LA Journal of Solids and Structures 6,
247-263.
207. M. A. Iqbal, G.
Gupta and N. K. Gupta (2010) 3-D Numerical Simulations of Ductile Targets subjected to oblique impact
by sharp nosed projectiles, Int J of Solids and Structures,47, 224-237.
208. M. A. Iqbal, A. Chakraborti, S. Beniwal, and N.
K. Gupta (2010) 3-D Numerical Simulations of Sharp Nosed Projectile Impact on
Ductile Targets, Int J of Impact Engineering, 37,185-195
209. M. Raghuram, A.
Deb, and N. K. Gupta (2010) Semi-emperical procedures for estimation of
residual velocity and ballistic limit for impact on mild steel plates by
projectiles, LA Journal of Solids and Structures, 7, 63-76.
210. N. K. Gupta, P. Kumar and S. Hegde (2010) On Deformation and
Tearing of Stiffened and Un-Stiffened Square Plates Subjected to Underwater
Explosion - A Numerical Study, Int. J of mechanical Sciences, 52, 733-744.
211. M. A. Iqbal, G.
Gupta, A. Diwakar, and N. K. Gupta (2010), Effect of projectile nose shape on
the ballistic resistance of ductile targets, , European Journal of Mechanics –A
/Solids, 29, 683-694
212. N. K. Gupta (2010)
Invited lecture, Modes of plastic collapse and phenomenon of large deformation
of thin walled structures under impact loading – a perspective, Procedings of
the TPCM 2010, Armenia
213. N. K. Gupta (2010)
On designs for safety,Science Conclave, Allahabad.
214. M. A. Iqbal, N. K.
Gupta (2010) Effect of Prjectile Nose Shape and Incedence Angle on Ballistic Resistance,
Implast 2010, Providence, Rhode Island USA
215. N. K. Singh, E.
Cadoni, M. K. Singha, and N. K. Gupta (2011) High strain rate characterization
of advanced high strength steel – Impact loading of light weight Structures
Valenciennes France
216. N. K. Singh, E.
Cadoni, M. K. Singha, and N. K. Gupta (2011) Mechanical Behavior of Advanced
High Strength Steel at High Strain Rates - PROTECT workshop Lugano, Switzerland
217. N. K. Gupta (2011)
Invited Lecture, Large deformation of thin walled structures under impact and
blast loading, Int conference on thinwalled structures Romania
218. N. K. Gupta (2011)
Invited lecture, On large deformation of thin walled structures – a
phenomenological perspective Impact Loading of light weight structures, France
219. M. A. Iqbal, A.
Diwakar, N. K. Gupta (2011) Oblique Impact of Ductile Targets by Varying Nose
Shape Projectiles Russian-Indian Workshop on Topical Problems of Solid and
Fluid Mechanics, Saint Petersburg, Russia
220. M. A. Iqbal, V. S.
Deore, N. K. Gupta (2011) Ballistic Limit of Single, Layered and Spaced
Targets, Russian-Indian Workshop on Topical Problems of Solid and Fluid
Mechanics, Saint Petersburg, Russia
221. Vikash Kumar
Satyam, Suhail Ahmad and NK Gupta (2011) Fatigue response of propeller shaft
under multiaxial random loads, Communicated, Fatigue and fracture of
engineering materials and structures. Communicated
222. N. K. Singh, E.
Cadoni, M. K. Singha and N. K. Gupta, (2011) Quasi-static and dynamic tensile
behavior of CP800 steel - Mechanics of Advanced materials and structures – accepted
for publication. DOI: 10.1080/15376494.2012.699594.
223. N. K. Singh, E.
Cadoni, M. K. Singha and N. K. Gupta, (2011) An experimental investigation on
the strain rate sensitivity of DP1200 and DP1400 steels – Int.J.Impact
Engineering – communicated X
224. M.A Iqbal, R.
Ansari, S H Khan and N K Gupta (2011) Experimental and numerical studies of
double nosed projectile impact on 1100-H14 aluminium targets, Int. J. Solids
and Structures, communicated X
225. M. A. Iqbal and N.
K. Gupta (2011) Ballistic limit of single and layered aluminium plates, Srain,
an Int J. of Experimental Mechanics 47, e205-219.
226. N. K. Singh, E.
Cadoni, M. K. Singha, N. K. Gupta, (2011) Mechanical behaviour of advanced high
strength steels at high strain rates. Applied Mechanics and Materials, 82,
178-183
227. S. S. Tokedar, M.
K. Singha and N. K. Gupta (2011) Lateral collapse of woven fabric composite
tubes under quasi-static and impact loading, Applied Mechanics and Materials,
82, 296-301
228. N. K. Singh, E.
Cadoni, M. K. Singha and N K Gupta, (2011) Dynamic tensile behavior of Multi
Phase high yield strength steel - Material and Design, 32, 5091-98.
229. N. K. Gupta
(2011), Large deformation in thin-walled structures under impact or blast
loading, Int J of Steel construction – Design and Research, 4, 215-223.
230. M. A. Iqbal, A.
Diwakar, A. Rajput, N. K. Gupta, (2012), Influence of projectile shape and
incidence angle on the ballistic limit and failure mechanism of thick steel
plates, Theoretical and Applied Fracture Mechanics, 62, 40-53.
231. N. K. Singh, E.
Cadoni, M. K. Singha, N. K. Gupta, (2012), Mechanical characterization of
multiphase steel at different rates of loading, Mat. Sci. Forum, 710, 421-26.
232. M. A. Iqbal, P. K.
Gupta, V. S. Deore, S. K. Tak, N. K. Gupta (2012) Effect of Target Span and Configuration
on the Ballistic Limit, Int. j. of Impact Engineering, 42, 11-24
233. Bidyapati Mishra,
P K Jena, B Ramakrishnan V Madhu, T. B. Bhat and N. K. Gupta (2012), Effect of
tempering temperature, plate thickness and presence of holes on ballistic
impact behaviour and ASB formation of a high strength steel, Int J. Impact
Engineering, 44. 17-28
234. M. Klaus, H. G.
Reimerdes and N. K. Gupta (2012), Experimental and Numerical investigations of
residual strength after impact of sandwich panels, Int. J. Impact Engineering,
44, 50-58.
235. N. K. Gupta and
Venkatesh (2012), Collapse behaviour of thin walled spherical shells under
central impact, Proceedings of the Indian National Science Academy, 78,
125-139.
236. N. K. Singh, M. K.
Singha, E Cadoni, and N. K. Gupta (2012), Strain rate sensitivity of an
aluminium alloy under compressive loads, Advanced Materials Research, 548,
169-173.
237. N. K. Singh, M. K.
Singha, E Cadoni, and N. K. Gupta (2012), Mechanical characterization of
multi-phase steel at different rates of loading, Material Science Forum, 710,
421-426
238. M. A. Iqbal, A.
Diwakar, A. Rajput, N. K. Gupta, (2012), Influence of projectile shape and
incidence angle on the ballistic limit and failure mechanism of thick steel
plates, Theoretical and Applied Fracture Mechanics, 62, 40-53.
239. N. K. Singh, M. K.
Singha, E Cadoni, and N. K. Gupta (2012), Strain rate sensitivity of die steel
under compressive loads, Advanced Materials Research, 585, 412-416.
240. Sahai R. S.
Sharma, K. Hans Raj, and N K Gupta (2012), Mechanical properties of A16061
processed by equal channel angular pressing, Advanced Materials Research, 585,
392-396.
241. Sahai R. S.
Sharma, K. Hans Raj, and N K Gupta (2012), The effect of die shape on evolution
of strain in equal channel angular pressing of Al alloy, Int. J. Advanced
Manufacturing Systems, 14, 2, 17-26.
242. N. K. Singh, M. K.
Singha, E. Cadoni, N. K. Gupta, (2012), Strain rate sensitivity of die steel
under compressive loads, Advanced Materials Research, 585, 412-416.
243. N. K. Singh, E.
Cadoni, M. K. Singha, and N. K. Gupta (2012) Strain rate sensitivity of an
aluminium alloy under compression loading, 3rd International Conference on
Theoretical and Applied Mechanics Athens Greece.
244. N. K. Singh, E.
Cadoni, M. K. Singha and N. K. Gupta. (2012) Mechanical behavior of a
structural steel at different rates of loading. International Symposium on
Engineering under Uncertainty: Safety assessment and management (ISEUSAM 2012),
BESU, Shibpur, Howrah, India, 4-6 January 2012. DOI
10.1007/978-81-322-0757-3-57.
245. M. A. Iqbal and N.
K. Gupta (2012) Response of thin aluminium plates to projectile impact, ICTAM
2012 (IUTAM world congress), August 2012, Beijing China.
246. Kumar, S. Kapuria
and N K Gupta (2012), Three dimensional piezoelasticity solution for hybrid
piezoelectric laminated plates featuring viscoelastic interfaces, ICTAM 2012
(IUTAM world congress), August 2012, Beijing China
247. N. K. Singh, M. K.
Singha, E. Cadoni and N. K. Gupta. (2012) Dynamic compressive behavior of
bearing steel. 3rd Asian conference on Mechanics of Functional Materials and
Structures 2012; Indian Institute of Technology Delhi, 5-8 December 2012,
747-750.
248. E. Cadoni, N. K.
Singh, M. K. Singha and N. K. Gupta. (2012) Strain rate behavior of multi-phase
and complex phase steels for automotive applications. International DYMAT-2012
conference; Freiburg, Germany, 2-7 September 2012. DOI:
10.1051/epjconf/20122605003.
249. N. K. Singh, M. K.
Singha, E. Cadoni and N. K. Gupta. (2013) Quasi-static and dynamic compressive
behaviour of plain carbon steels. PROTECT 2013, 26-27 August 2013, Mysore,
Karnataka, India.
250. Deb, P.
Lakshmanan, N.K. Gupta, D.K. Kharat (2013), A study on glass fiber-reinforced
composites for vehicle impact safety design, Indo Russian Workshop on Topical
Problems in solids and fluids, IIT Madras, Chennai, Elite Publishers, p- 106-20
251. M.A. Iqbal, K.
Senthil, V. Madhu, N.K. Gupta (2013), Material characterization and ballistic
evaluation of mild steel, Indo Russian Workshop on Topical Problems in solids
and fluids, IIT Madras, Chennai, Elite Publishers, p- 121-30.
252. P.K. Gupta, G.
Tiwari, M.A. Iqbal, N.K. Gupta (2013), Effect of target to projectile diameter
ratio (D/d) on the ballistic limit, Indo Russian Workshop on Topical Problems
in solids and fluids, IIT Madras, Chennai, Elite Publishers, p- 139-50
253. R. Velmurugan,
R.S. Sikarwar, M. Srinivasan, N.K. Gupta. (2013) Bullet impact
on unidirectional carbon/epoxy panels Indo Russian Workshop on Topical Problems
in solids and fluids, IIT Madras, Chennai, Elite Publishers.
254. P. K. Gupta and N
K Gupta (2013) A study on axial compression of tubular metallic shells having
combined tube cone geometry, Thin-walled structures, 62, 85-95.
255. Bidyapati Mishra,
B Ramakrishnan, P K Jena, V Madhu and N K Gupta (2013), Experimental studies on
effect of size and shape of holes on damage and microstructure of high hardness
armour steel plates under ballistic impact, Material and Design, 43,
17-24.
256. M.A. Iqbal, S.H.
Khan, R. Ansari, N.K. Gupta (2013), Experimental and numerical studies of
double-nosed projectile impact on aluminium plates, Intr. J. Impact
Engineering, 54, 232-245
257. P. K. Gupta., M.
A. Iqbal, G. Tiwari, N K Gupta (2013), Effect of configuration and Target Span
on ballistic resistance, Key Engineering Materials, 535-536, 52-55.
258. A.V. Manzhirov, S.
A. Lyche and N. K. Gupta (2013), Nonlinear models of growing solids, Proc.
Indian Natn. Sci. Acad. 79 (4), 529-546.
259. J. Lin, H. Naceur,
E Markiewicz and N. K. Gupta (2013), Geometrically Nonlinear Analysis of
Thin-Walled Structures using Efficient SPH Shell-Based Method, Proc. Indian
Natn. Sci. Acad., 79(4), 651-660.
260. Y. P Kumar and
N.K. Gupta (2013), Response of Metallic Plates Subjected to Underwater
Explosion, Proceedings Indian National Science Academy, 79 (4), 745-754.
261. N. K. Singh, E.
Cadoni, M. K. Singha and N. K. Gupta. (2013), Dynamic Characterization of
aluminium alloy at wide range of strain rates, Proc. Indian Natn. Sci. Acad.,
79(4), 587-596.
262. K.S Tan, S. V.
Wong, M. M. H. Megat Ahmad, R. S. Radin Umar and N. K. Gupta (2013),
Computational simulation of fully deformable motorcycle, wire-spoke wheel,
Proceedings Indian National Science Academy, 79 (4), 639-650.
263. Deb, B.
Haorongbam, and N. K. Gupta (2013), Thin walled steel hat section components as
protective counter-measures for vehicle impact safety, Proc. Indian Natn. Sci.
Acad., 79(4), 669-678.
264. P. K. Gupta and N.
K. Gupta (2013), Investigation of external inversion of thin walled tubes,
Proc. Indian Natn. Sci. Acad., 79(4), 679- 686.
265. P. Kumari, S. Kapuria, A. V. Manzhirov, and N. K. Gupta, (2013) Mixed-field extended
Kantorovich method for accurate prediction of boundary layer stresses in
composite and piezolaminated structures, In N. K. Gupta, A. V. Manzhirov, and
R. Velmurugan, Eds., Topical Problems in Theoretical and Applied
Mechanics, Elite Publishing, New Delhi, 2013. PP. 268–278.
266. K. Senthil, G.
Tiwari, M. A. Iqbal and N. K. Gupta (2013), Impact response of single and
layered thin plates, Proc. Indian Natn. Sci. Acad., 79(4), 705-706
267. R. S. Sikarwar, R.
Velmurugan, and N. K. Gupta, (2013), Ballistic performance of Kevlar/epoxy
composite laminates, Proc. Indian Natn. Sci. Acad., 79(4), 789-800.
268. K. Hans Raj, R. S.
Sharma, A. Sahai, and N. K. Gupta (2013), Different die designs for processing
of aluminium alloy using equal channel angular pressing, a FEM study, Proc.
Indian Natn. Sci. Acad., 79(4), 829-836.
269. V. Manzhirov, S. A. Lychev, and N. K. Gupta, (2013) Geometrical
language in the theory of growing solids. Topical Problems in Theoretical and
Applied Mechanics. New Delhi: Elite Publishing House, 2013. Р. 1–23.
270. R. Velmurugan, G.
Balaganeshan, and N. K. Gupta (2013), Impact loading on glass /epoxy composite
laminates with nano clay, Key Engineering Materials, 535-536, 72-75.
271. M. Quantmann, N.
Aswini, H. G. Reimerdes, N. K. Gupta (2013) Super- elements for a
computationally efficient structural analysis of elliptical fuselage sections,
Aerospace Science and technology, Pages 76-83
272. N. K. Singh; E.
Cadoni; M. K. Single; and N. K. Gupta (2013), Dynamic Tensile and compressive
behaviours mild steel at wide range of strain rates, Journal of Engineering,
Mechanics, Vol. 139, 1197–1206.
273. Rahul S. Sikarwar,
R. Velmurugan and N. K. Gupta (2014) Influence of Fiber Orientation and
Thickness on the Response of Glass/Epoxy Composites Subjected to Impact Loading,
Composites: Part B, 60, 627-636.
274. G. Tiwari, M. A.
Iqbal, P. K. Gupta, N. K. Gupta (2014) The Ballistic Resistance of Thin
Aluminium Plates with varying degree of Fixity Along the Circumference, Int. J.
of Impact Engineering, 74, 46-56.
275. N. K. Singh; E.
Cadoni; M. K. Singha; and N. K. Gupta (2014), Quasi-static and dynamic tensile
behavior of CP800 steel, Mechanics of Advanced Materials and Structures, 21,
531-537
276. G. Balaganesan, R.
Velmurugan, M. Srinivasan, N.K. Gupta, K. Kanny (2014), Energy absorption and ballistic limit
of nanocomposite laminates subjected to impact loading, Available online
21 March
277. P. K. Gupta and N.
K. Gupta (2014) A study of different modes of collapse in metallic hemi
spherical shells resting on flat platen and compressed with hemispherical nosed
indenter, Int. J. Solids and Structures, 51, 2518-2528.
278. V. Manzhirov, K. E. Kazakov, and N. K. Gupta,
(2014) Axisymmetric
problem of multi body conformal contact for foundations with surface
non-uniform coatings [in Russian], in Problems in Dynamics of Interaction
Between Deformable Media. Proceedings of VIII International Conference,
September 2226, GorisStepanokert. Chartaraget, Erevan, PP. 281–285.
279. G. Tiwari, M. A.
Iqbal P. K. Gupta and N. K. Gupta (2014), The ballistic resistance of thin
aluminium plates with varying degree of fixity along the circumference, Int J.
Impact Engineering, 74, 46-56
280. P. Kumari,
S. Kapuria, N. K. Gupta, A.V. Manzhirov, (2014) Mixed-field extended
Kantorovich method for accurate prediction of boundary layer stresses in
composite and piezolaminated structures, Indo Russian Workshop on Topical
Problems in solids and fluids, IIT Madras, Chennai, Elite Publishers,
281. G. Balaganesan,
R. Velmurugan, N.K. Gupta. (2014) Perforation of nano-composite
laminates during projectile impact, Indo Russian Workshop on Topical Problems
in solids and fluids, IIT Madras, Chennai, Elite Publishers,
282. N. K. Gupta (2014)
Plasto-mechanics of large deformation under impact loading, 39 conference on
Plasticity, 1-5 Sept 2014, Poland
283. K. Senthil, M. A.
Iqbal, N. K. Gupta (2014) Thin metallic plates subjected to projectile impact,
4th International Conference on Impact Loading of light Weight Structures, Cape
Town, South Africa, 12–16 January 2014
284. M. A. Iqbal, K.
Senthil, P. Bhargava, N. K. Gupta, (2015), The characterization and ballistic
evaluation of mild steel, Int J. of Impact Engineering 78, 98-113
285. S. Gurusideswar,
R. velmurugan and N. K. Gupta (2015), High strain rate sensitivity of
Epoxy/clay nano composites using non-contact strain measurement, Polymer, 86,
197-207
286.
K. S. Rao, S. Mishra, and N. K. Gupta (2015),
Fracture propagation of rock under dynamic regime; 50th International
conference, Engineering Geology New Millenium (EGNM), Special publication of
Journal of Engineering Geology. ISSN : 0970 – 5317
287.
K. Senthil, M.A. Iqbal, D. Bhattacharjee, P.
Bhargava, N.K. Gupta, Ballistic resistance of Armox 500T steel plates against
7.62 API projectiles, Proceedings of the 3rd International Conference on Protective Structures,
February 3-6, 2015, University of
Newcastle, Australia, pp 501-505.
288.
Manzhirov, A., and Gupta, N. K. (2015). Fundamentals of continuous growth processes in
technology and nature. In IUTAM symposium on growing solids. Symposium
materials. Institute for Problems in Mechanics RAS, Moscow (pp. 73-76).
289. Evgeniy P. Dats, Evgenii V. Murashkin, Narinder K. Gupta
(2015). On Yield Criterion Choice in Thermoelastoplastic Problems, . In IUTAM
symposium on growing solids. Symposium materials. Institute for Problems in
Mechanics RAS, Moscow (pp. 187-200)
290. G. Balaganeshan,
M. Pushparaja, R. Velmurugan, N.K. Gupta (2015). Impact Loading on Nanocomposites in
Thermal Environment,
In IUTAM symposium on growing solids. Symposium materials. Institute for
Problems in Mechanics RAS, Moscow (pp. 210-219)
291. M.A. Iqbal, K.
Senthil, P. Sharma N. K. Gupta (2016), An investigation of the constitutive
behavior of Armox 500T steel and armour piercing incendiary projectile impact,
IntJou. of Impact Engineering, 96, 146-64.
A.
Manzhirov and N. Gupta, (2016) Fundamentals of
Surface Growth in Nature and Technology. XXIV ICTAM, 21–26, Montreal, Canada.
Montreal,
292. E. Cadoni, N. K.
Singh, D. Forni, M. K. Singha, and N. K. Gupta, (2016), Strain rate effects on
mechanical behaviour of two dual phase steels in tension, The European Physical
Journal Special Topics, 225(2), 409-21.
293. S. Gurusideswar,
R. Velmurugan, and N. K. Gupta, (2016). High strain rate sensitivity of
epoxy/clay nanocomposites using non-contact strain measurement. Polymer, 86,
197-207.
294. K. S. Rao, S.
Mishra, and N. K. Gupta (2016); Behaviour of underground structures in soft
rocks under different strain rate and litho-static pressure, 2nd International
conference on rock dynamics, “Rocdyn: From Research to Engineering” Suzhou,
China. Taylor and Francis Group, London, ISBN 978-1-138-02953-8.
295. K. S Rao., S.
Mishra, and N. K. Gupta (2016); Effect of different loading conditions on
tunnel lining in soft rocks; ISRM International Symposium “EUROCK 2016” ,
Cappadocia, Turkey. Taylor and Francis Group, London, ISBN 978-1-138-03265-1.
296. S. Mishra, C.
Abhijith, K. S. Rao, N. K. Gupta, A. Singh, A. Kumar, (2017), Parametric Study
of Lined and Unlined Tunnels at Shallow Depths under Coupled Static and Cyclic
Loading Condition, Tunnelling in Himalayan Geology, Volume: 340, Jammu, India.
297. Vijayan, V., Hegde, S., & Gupta, N. K. (2017). Deformation and
ballistic performance of conical aluminium projectiles impacting thin aluminium
targets: Influence of apex angle. International Journal of Impact Engineering,
110, 39-46.
298. Gurusideswar, S.,
Velmurugan, R., & Gupta, N. K. (2017). Study of Rate Dependent Behavior of
Glass/Epoxy Composites with Nanofillers using Non-Contact Strain Measurement.
International Journal of Impact Engineering, 110, 324-337.
299. M. A. Iqbal, K.
Senthil, V. Madhu, N. K. Gupta (2017), Oblique Impact on single, Layered and
Spaced Mild Steel Targets by 7.62 AP Projectiles, International Journal of
Impact Engineering, 110, 26-38.
300. K. Senthil, M. A.
Iqbal, P. S. Chandel, N. K. Gupta (2017), Study of Constitutive the Behaviour
of 7075- T651 Aluminum Alloy, International Journal of Impact Engineering,
Volume 108, Pages 171-190.
301. M. A. Iqbal,
Abhishek Rajput, and N. K. Gupta (2017), Performance of prestressed concrete
targets against projectile impact, Int. Jou. Of Impact Engineering, 110, 15-25
302. K. Snethil, B.
Arindam, R. Mittal, N. K. Gupta (2017) Numerical Investigations on the Impact
of Hemispherically Tipped Projectiles on Thin Plates Procedia Engineering,
Volume 173, 2017, Pages 1926-1931
303. K. Senthil, B.
Arindam, M. A. Iqbal, and N. K. Gupta (2017) Ballistic Response of 2024
Aluminium Plates Against Blunt Nose Projectiles Procedia Engineering, Volume
173, 2017, Pages 363-368
304. K. Senthil, M. A.
Iqbal, P. Bhargava, and N. K. Gupta (2017) Experimental and Numerical Studies
on Mild Steel Plates against 7.62 API Projectiles, Procedia Engineering, Volume
173, 2017, Pages 369-374.
305. S. Mishra, K. S.
Rao, N. K. Gupta, and A. Kumar (2017); Damage to Shallow Tunnels under Static
and Dynamic Loading, Procedia Engineering, 173:1322-1329.
306. Sikarwar, R. S., Velmurugan, R., & Gupta, N. K. (2017). Effect of velocity
and fibres on impact performance of composite laminates–Analytical and
experimental approach. International Journal of Crashworthiness, 26, 589-601.
307. Nagesh, C., & Gupta, N. K. (2017). Large Deformations and Tearing of Circular
Plates and Plate-Tube Structural Combinations under Impulsive Loading. Procedia
Engineering, 173, 526-532.
308. Gurusideswar S.,
Srinivasan N., Velmurugan R., & Gupta, N. K. (2017). Tensile Response of
Epoxy and Glass/Epoxy Composites at Low and Medium Strain Rate Regimes.
Procedia Engineering, 173, 686-693.
309. Aswini, N., Reimerdes, H. G., & Gupta, N. K. (2017). Post buckling
Responses of the Panels Subjected to Combined Compression and Shear Stresses.
Procedia Engineering, 173, 25-32.
310. Manzhirov and N. Gupta, Fundamentals of Continuous Growth
Processes in Technology and Nature. Procedia IUTAM, 2017. Vol.23. PP. 1–12.
311. Naresh, K., Shankar, K., Velmurugan, R., & Gupta, N. K. (2017). Probability-based
Studies on the Tensile Strength of GFRP, CFRP and Hybrid Composites. Procedia
Engineering, 173, 763-770.
312. Pushparaja, M.,
Balaganesan, G., Velmurugan, R., & Gupta, N. K. (2017). Energy Absorption
Characteristics of Carbon/Epoxy Nano Filler Dispersed Composites Subjected to
Localized Impact Loading. Procedia Engineering, 173, 175-181.
313. Rajkumar, A. R., Ramachandran, V., Gopal, K. V. N., & Gupta, N. K.
(2017). Reversible
Plasticity Shape-Memory Effect in Epoxy Nanocomposites: Experiments, Modeling
and Predictions. In Mechanics for Materials and Technologies (pp. 387-415).
Springer International Publishing.
314. Haorongbam, B., Deb, A., & Gupta, N. K. (2017). Behavior of
Polyurethane Foam-filled Steel Hat Sections Under Axial Loading: Testing and
Simulation. Procedia Engineering, 173, 1349-1356.
315. Srinivas, G. R.,
Deb, A., Sanketh, R., & Gupta, N. K. (2017). An Enhanced Methodology for
Lightweighting a Vehicle Design Considering Front Crashworthiness and
Pedestrian Impact Safety Requirements. Procedia Engineering, 173, 623-630.
316. Kumar, Y. P., Gupta, N. K., Rao, Y. S., & Kant, B.
(2017). On
Shock Response of Marine Sandwich Structures Subjected to UNDEX Loading.
Procedia Engineering, 173, 1932-1942.
317. Vijayan, V., Hegde, S., & Gupta, N. K. (2017). Observations on
Impacts of Deformable Conical Projectiles at 60 Degree Target Obliquity.
Procedia Engineering, 173, 123-129.
318. Pradhan, P. K.,
Gupta, N. K., Ahmad, S., & Biswas, P. P. (2017). Numerical Investigations
of Spherical Projectile Impact on 4mm Thick Mild Steel Plate. Procedia
Engineering, 173, 109-115.
319. Senthil, K.,
Iqbal, M. A., & Gupta, N. K. (2017). Ballistic resistance of mild steel
plates of various thicknesses against 7.62 AP projectiles. International
Journal of Protective Structures, 2041419617700007.
320.
Senthil,
K., Arindam, B., Mittal, R., Iqbal, M. A., & Gupta, N. K. (2017). Numerical
Investigations on the Impact of Hemi Spherically Tipped Projectiles on Thin
Plates. Procedia Engineering,
173, 1926-1931.
321.
K. Senthil, M.A. Iqbal, N.K. Gupta, Flow and fracture behavior of
mild steel and Armox 500T steel, 3rd Indian Conference on
Applied Mechanics, July 5-7, 2017, MNNIT, Allahabad, Uttar Pradesh, India, pp. 111-112.
322. Sahai, A., Raj, K. H., & Gupta,
N. K. (2017). Mechanical Behaviour and Surface Profile Analysis of Al6061
alloy Processed by Equal Channel Angular Extrusion. Procedia Engineering, 173,
956-963.
323. Suri, A., Sahai, A., Raj, K. H., & Gupta, N. K. (2017). Impact and Tensile
testing of Al2024 Alloy Processed by Friction Stir Processing. Procedia
Engineering, 173, 679-685.
324.
Sadique,
M.R., Iqbal, M.A., Rawsan, A., Gupta, N.K. (2018), Response of outer
containment of an NPP against aircraft crash and induced fire, Thin Walled
Structures, Vol.126, 182-92
325.
Rajput, A., Iqbal, M.A., Gupta, N.K. (2018),
Ballistic performances of concrete targets subjected to long projectile impact,
Thin Walled Structures, Vol.126, 171-81
326.
K. Senthil, M.A. Iqbal, V. Bhardwaj,
N.K. Gupta, Estimation of impact
strength of 7075-T651 aluminium plate against steel penetrator, International
Conference on Advances in Construction Materials and Structures, March 7-8,
2018, IIT Roorkee, Uttarkhand, pp.1.
327. Mishra, S., Rao, K.S., Gupta, N.K., Kumar, A. (2018),
Damage to shallow tunnels in different geomaterials under static and dynamic
loading, Thin Walled Structures, Vol 126, 138-49
328. Naresh, K.,
Shankar, K., Velmurugan, R., Gupta, N.K. (2018), Statistical analysis of the
tensile strength of GFRP, CFRP and hybrid composites, Thin Walled Structures,
Vol126, 150-61.
329. Gupta, P. K.,
Iqbal, M. A., Mohammad, Z., Baqi, A., Gupta, N.K., (2018), Energy absorption in
thin metallic targets subjected to oblique projectile impact: A numerical
study, Thin Walled Structures, Vol 126, 58-67.
330. Senthil, K.,
Iqbal, M. A., Arindam, B., Mittal, R., Gupta, N. K., (2018), Ballistic
resistance of 2024 aluminium plates against hemispherical, sphere and blunt
nose projectiles, Thin Walled Structures, Vol 126, 94-105.
331. Gupta, P. K.,
Gupta, N. K., (2018) A study of development mode of collapse with variation of
strains and stresses during compression of metallic shells having dome-cone
shape, Thin Walled Structures, 126, 68-78.
332. D. Paul, R.
Velmurgan, N. K. Gupta, A. V. Manzhirov, Fabrication and analysis of the flexural properties of
syntactic foam – GFRP sandwich composites. Proceedings of the V International
conference on the Topical Problems of Continuum Mechanics, 2–7 October 2017,
Tsaghadzor, Armenia. NUASA, Yerevan, 2017. PP.161–162.
333. Paul, D.,
Velmurugan, R., Jayaganthan, R., Gupta, N. K., Manzhirov, A.V., (2018),
Analysis of syntactic foam - GFRP sandwich composites for flexural loads,
In IOP conference series: journal
of physics: conference series, 991.
334. Madeshwaran, S.
R., Jayaganthan, R., Velmurugan, R., Gupta, N. K., Manzhirov, A.V. (2018),
Mechanical and thermal properties of MoS2reinforced epoxy nanocomposites,
In J. Phys.: Conf. Ser.
991, 1742-1749.
335. Gurjar, J. S.,
Banafar, R. N. S., Gupta, N. K., Gurjar, P. K. S., & Singh, L. (2018).
Effect of NAA, GA3 on growth and yield of tomato varieties. Journal of Pharmacognosy and Phytochemistry, 7(5), 3157-3160.
336. Wagh, Y. R., Paul,
S., Gupta, N., & Singh, R. K. (2018). Metallurgical and tribological
investigation of micro-scale fibre laser-based surface hardening. International Journal of Mechatronics and
Manufacturing Systems, 11(2-3),
120-134.
337.
Sahai,
A., Yadav, P., Sharma, R. S., & Gupta, N. K. (2018). Intensifying hands-on
learning, exploration, and inventorship by designing fused deposition modeling
three-dimensional printer. In IUTAM
Symposium on Mechanical design and analysis for AM technologies (pp. 76-80).
338.
K. Senthil, M.A.
Iqbal, N.K. Gupta, Impact strength of mild steel and Armox 500T steel, 46th International Summer
School-Conference "Advanced Problems in Mechanics”, 25-30 June 2018, Saint
Petersburg, Russia, pp. 238-250.
339.
D. A. Parshin, N. K. Gupta (2018). Additive manufacturing in civil
engineering. IUTAM Symposium on Mechanical design and analysis for
AM technologies, 44-47.
340. Paul, P.,
Velmurugan, R., Gupta, N. K., & Manzhirov, A. V. (2018). The effect of
particle volume fraction and tube dimensions on the crushing behaviour of
hollow glass particle-filled gfrp composite tubes. In IUTAM Symposium on Mechanical design and
analysis for AM technologies (pp. 52-55).
341. Navya, G., Joshi,
A., Velmurugan, R., Jayaganthan, R., Gupta, N. K., & Manzhirov, A. V.
(2018). Tensile behaviour of ultrafine grained aa 2014 al alloy. In IUTAM Symposium on Mechanical design and
analysis for AM technologies (pp. 38-40).
342. D. A. Parshin, A.
V. Manzhirov, N. K. Gupta, R Velmurugan. (2018). Additive
Manufacturing of Composite Materials. IUTAM Symposium on Mechanical design and
analysis for AM technologies, 48-51
343. Srivastava, M.,
Asghar, A., Srivastava, N. N., Gupta, N., Jain, A., & Verma, J. (2018). An
anatomic morphological study of occipital spurs in human skulls. Journal of Craniofacial Surgery, 29(1), 217-219.
344. Sharma, H.,
Mishra, S., Rao, K. S., & Gupta, N. K. (2018). Effect of Cover Depth on
Deformation in Tunnel Lining When Subjected to Impact Load. In ISRM International Symposium-10th Asian Rock
Mechanics Symposium. International Society for Rock Mechanics and Rock
Engineering.
345. D. Paul, V. Ramachandran, N. K. Gupta, (2019), Improvements in the
crushing behaviour of glass fibre-epoxy composite tubes by the addition of
hollow glass particles, Thin-Walled Structures 141, 111-118.
346. K. Gupta, R Velmurugan, M Joshi, N. K. Gupta (2019) Studies on shape memory alloy-embedded GFRP composites for improved
post-impact damage strength, International Journal of
Crashworthiness 24 (4), 363-379
347.
M. K. Khan, M. A. Iqbal, V. Bratov, N. K. Gupta, N.
F. Morozov (2019),
A numerical study of ballistic behaviour of ceramic
metallic bi-layer armor under impact load, Materials Physics and Mechanics 42 (6), 699-710
348. K. Senthil, M.A.
Iqbal, N.K. Gupta, Comparison of Ballistic Resistance of Armox 500T Steel and
7075-T651 Aluminium Plate against 12.7 API Projectiles, IMPLAST 2019, 29 September – 03 October 2019, Pusan National
University, Busan, South Korea.
349.
Singh, R., Khetan, D., Sharma, N., Gupta, N.,
Moolchandani, K., & Naneria, V. (2019). Thromboelastography (TEG) guided
management of refractory bleeding in post-operative non healing wound. International Journal of Surgery, 3(3), 17-19.
350. G. Prakash, N. K. Singh, N. K. Gupta, (2020), Deformation behaviours of
Al2014-T6 at different strain rates and temperatures, Structures 26, 193-203
351. M. K. Khan, M. A. Iqbal, V. Bratov, N. F. Morozov, N. K. Gupta, (2020),
An investigation of the ballistic performance of independent ceramic target, Thin-Walled Structures 154, 10
352. N. A. Kazarinov,
V. A. Bratov, N. F. Morozov, Y. V. Petrov, V. V. Balandin, M. A. Iqbal, N. K.
Gupta (2020), Experimental and numerical analysis of PMMA impact fracture,
International Journal of Impact Engineering, 103597
353. G. Prakash, N. K.
Singh, P. Sharma, N. K. Gupta (2020), Tensile, Compressive, and Flexural
Behaviors of Al5052-H32 in a Wide Range of Strain Rates and Temperatures,
Journal of Materials in Civil Engineering 32 (5), 040200902.
354. Mache, A. Deb, N.
K. Gupta, (2020), An experimental study on performance of jute‐polyester
composite tubes under axial and transverse impact loading, Polymer Composites
41 (5), 796-1812.
355. G. Tiwari, N.
Khaire, M. A. Iqbal, P. K. Gupta, N. K. Gupta, (2020), Ballistic
response of double layered 1100-H12 aluminium hemispherical shell structure,
Thin-Walled Structures 148 – 106619
356. Lindahl, J. F.,
Vrentas, C. E., Deka, R. P., Hazarika, R. A., Rahman, H., Bambal, R. G., &
Gandhi, R. S. (2020). Brucellosis in India: Results of a collaborative workshop
to define One Health priorities. Tropical
Animal Health and Production, 52(1), 387-396.
357. Gyan Prakash, N. K. Singh; and N. K. Gupta (2020),
Mechanical Behavior of Magnesium Alloy AZ61 at
Different Strain Rates and Temperatures under Tensile, Compressive, and
Flexural Loads, Journal of Materials in Civil Engineering 32 (11), 04020336.
358.
K.Naresh, K.Shankar R.Velmurugan, N. K. Gupta,
(2020), High
strain rate studies for different laminate configurations of bi-directional
glass/epoxy and carbon/epoxy composites using DIC https://doi.org/10.1016/j.istruc.2020.05.022
359. J. Jefferson Andrew,
Johannes Schneider, Jabir Ubaid, R. Velmurugan, N.K.Gupta (2021) Energy
absorption characteristics of additively manufactured plate-lattices under low-
velocity impact loading, International Journal of Impact
Engineering, Vol. 149.
360. Swapnil
Mishra, Ankesh Kumar, K. S. Rao, N. K. Gupta (2020) Experimental and Numerical
investigation of dynamic response of tunnel in soft rocks, Structures, online
23 Sept. 2020.
361. Gyan
Prakash, N.K. Singh, N.K. Gupta (2021), Flow stress behaviour of AZ81 Magnesium
Alloy under Dynamic Loads, (ASCE) J. Mater. Civ. Eng (2021) 33(3)
362. M.
K. Khan, M. A. Iqbal, N. K. Gupta (2021), A numerical study of ballistic
resistance of single layer ceramic target, MFMEL, South Korea.
363.
JJ Andrew, J Schneider, J Ubaid, R Velmurugan, NK
Gupta, S Kumar (2021), Energy absorption characteristics of additively
manufactured plate-lattices under low-velocity impact
loading, International Journal of Impact Engineering 149, 10376812021
364.
S Mishra, A Kumar, KS Rao, NK Gupta,2021), Experimental and numerical
investigation of the dynamic response of tunnel in soft rocks, Structures 29,
2162-217322021
365. Paul, D, Velmurugan, R, Gupta, N.K, Experimental and analytical
studies of syntactic foam core composites for impact
loading, International Journal of Impact Engineering, (2020), DOI: 10.1080/13588265.2020.1797346
366.
Andrew, J.J, Schneider, J, Ubaid, J, Velmurugan, R, Gupta, N.K, Kumar S, Energy absorption
characteristics of additively manufactured plate-lattices under low- velocity
impact loading, International Journal of Impact Engineering, Volume 149, March 2021, Article number 103768.
367.
G Nvya, R Jayaganthan, N K Gupta, R Velmurugan, Finite
Element Analysis of Tensile Behaviour of Glass Fibre Composites for Varying
Strain Rates, Thin walled structures, TWST_2019_1917R1 (submitted after I
revision).
368. Mishra, S., Rao, K. S. and Gupta,
N. K. (2021); “Development of Impact Testing Facility (ITF) for Underground
Structures”. Geotechnical Testing
Journal (Communicated).
369. Mishra, S., Rao, K. S. and Gupta,
N. K. (2021); Effect of Impact and Blast Load on Shallow Tunnels; Rock Mechanics and Rock Engineering (Communicated).
370.
Mishra,
S., Rao, K. S., and Gupta, N. K. (2021); Physical and Numerical
Modeling of Tunnels under Impact Load; International Journal of Impact Engineering (Communicated).
371. Rao K. S., Mishra, S., and
Gupta N. K. (2016); Behavior of Underground Structures in Soft Rocks under
Different Strain Rate and Litho-Static Pressure, 2nd International
conference on rock dynamics, “Rocdyn: From Research to Engineering”, Suzhou,
China. Taylor and Francis Group, London, ISBN 978-1-138-02953-8.
372.
Mishra, S., Dhamne, R., Rao, K. S., and Gupta, N. K. (2020); Analysis of Urban Tunnels under Different Loading
Conditions; 7thInternational
Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil
Dynamics (7ICRAGEE) Banglore India.
373. K. Senthil, M. Sethi, L. Pelecanos, N.K Gupta, Prediction of mitigation strategies on
underground tunnels against blast loading, International Journal
of Protective Structures, June 2021. (Under Review)
374. K. Senthil, R. Sharma, S. Rupali, A. Thakur, M. A. Iqbal,
N. K. Gupta, Prediction of Superior Layer Configuration of
Titanium Ti-6Al-4V and Aluminium
2024-T3 against Soft Projectiles, International Journal of Protective
Structures, June 2021.
BOOKS
1. N.
K. Gupta and B. Karunes (Eds.) (1973); Stress waves in solids, Edited
proceedings of the Symposium on Stress Waves in Solids. Indian Society of
Theoretical and Applied Mechanics.
2. N.
K. Gupta and B. Karunes (Eds.) (1978); Large Deformations, Edited proceedings
of the Symposium on Large Deformations held at IIT Delhi. Vision Books.
3. N.
K. Gupta and S. Sengupta (Eds.) (1984); Large Deformations, Edited procs. of
the Symp. on Large Deformations, in memory of Prof. B. Karunes, held at IIT
Delhi. South Asian Publisher.
4. N.
K. Gupta (Editor) (1993); Plasticity and Impact Mechanics. Wiley Eastern
Limited, New Delhi, India.
5. N.
K. Gupta (Editor) (1996); Plasticity and Impact Mechanics. New Age Publishers,
New Delhi, India.
6. N.
K. Gupta (2001) Fore word for Collected works on Benjamin Robins and Charles
Hutton, by W. Johnson
7. N.
K. Gupta (Editor) (2003); IMPLAST’ 03, Plasticity and Impact Mechanics, Phoenix
Publishing House, New Delhi, India
8. N.
K. Gupta, and H. Abbas (2003), A Chapter in the book “Advances in Dynamics and
Impact Mechanics” WIT Press, Southampton, UK. (Editors: Nurick G. N., and
Brebia C. A.)
9.
N.
K. Gupta and A V Kukudzhanov,(Eds.) (2007) Large Deformations
10. N
K Gupta and A V Manzhirov (Eds) (2009) Topical Problems in Solid Mechanics,
Elite Publishers
11. A.
V Manzhirov, N K Gupta, D. AIndeitsev (Eds) (2011) Topical Problems in Solids
and Fluids, Elite Publishers.
12. N.
K. Gupta and M. A. Iqbal (2017), Plasticity and Impact Mechanics IMPLAST’16,
Procedia Engineering, Volume 173, Elsevier.
13. N. K. Gupta
and M. A. Iqbal (2017), Plasticity and Impact Mechanics IMPLAST’16, Thin-Walled
Structures, Special Issue, Elsevier.
14. N. K. Gupta, A. V. Manzhirov, and
R. Velmurugan, Eds., (2013) Topical Problems in Theoretical and Applied
Mechanics, Elite Publishing, New Delhi,
15. A. V. Manzhirov and N. K. Gupta, Eds.
(2015), IUTAM Symposium on Growing solids. Symposium materials. M.: IPMech RAS,
2015. 126 p.